Appliance Installation

Why Proper Installation Matters

Electrical Load Issues

We regularly see appliances tripping circuits because they’ve been connected to undersized cables or overloaded switchboards. A double oven drawing 4,000 watts shouldn’t be on the same circuit as your kettle and toaster.

Water and Drainage Mistakes

Dishwashers and washing machines installed without proper drainage or backflow protection can flood kitchens and laundries. We’ve even found washing machines plumbed into stormwater lines – completely illegal.

Poor Positioning

Wall ovens or rangehoods mounted too close to cabinetry risk overheating. Clothes dryers without venting damage walls with condensation. And gas cooktops installed without minimum clearances breach safety codes.

What We Install – And How We Do It Right

Ovens & Cooktops

Whether freestanding or built-in, ovens require proper clearance, isolation switches, and suitable circuits. For induction cooktops, we ensure the wiring is rated for sustained high draw, and the bench is heat-resistant where required.

Dishwashers

We check both the water pressure and electrical connection. If a hardwired model is being swapped in, we test the load and install a compliant disconnection point—no extension cords or under-bench double adaptors.

Washing Machines & Dryers

For dryers, we look at venting options—roof ducts, external walls, or condenser setups. Washing machines get tested for secure water inlets and drainage. We also check for potential water hammer or slow-drain issues.

Rangehoods

Ducting must be properly sealed and vented to the outside. Recirculating models need filters and spacing from cooktops. We’ve corrected many installs where the hood simply blew steam into a closed cupboard cavity.

Refrigerators & Wine Cabinets

Modern fridges need proper airflow around the compressor, level flooring, and in some cases, plumbing for ice makers. We inspect cabinetry to prevent overheating and vibration noise.

Our Installation Checklist – What You Can Expect

Site assessment – Check space, circuit, connections, and ventilation

Old unit removal – Safe disconnection and clean-up

New appliance connection – Electrical, plumbing, or venting work as needed

Testing and compliance check – Confirm operation and issue compliance certificate (if applicable)

Final walk-through – Answer any questions and demonstrate controls if requested

Every install follows Australian standards and manufacturer specs – no shortcuts, no guesswork.

Why Choose a Licensed Installer?

Because compliance isn’t optional. Proper appliance setup protects your:

• Appliance warranty

• Home insurance

• Electrical safety

• Energy efficiency

We’re licensed, experienced, and up to speed with all the latest codes and products. Whether it’s a major kitchen upgrade or a simple swap, we’ve got it handled.

Why Locals Trust Jetset Electrical 

When electrical issues strike, from sparking outlets to flickering lights, you need experts.

Enter Jetset Electrical: our licensed and insured team brings precision and safety to every task. Whether installing ceiling fans or upgrading switchboards, we work swiftly and leave no trace behind—just flawless results.

With upfront pricing and no hidden fees, what you see is exactly what you pay.

Local Experts: Meaning we understand local electrical requirements and building standards.

Rapid Service: Electrical problems don’t wait, and neither should you. We offer prompt service to get your home back on track quickly.

No Call-Out Fees: We believe in transparency – no hidden fees, just honest, upfront pricing.

High-Quality Workmanship: Our licensed electricians bring years of experience and stay up to date with the latest industry advancements.

Customer-Focused Approach: Your satisfaction is our priority. We listen, assess, and provide solutions that suit your needs.

Signs Your Appliance Hasn’t Been Set Up Correctly

• It hums, buzzes, or vibrates during normal use

• The switchboard trips when it’s turned on

• There’s water under or behind the unit

• It doesn’t sit level or flush with cabinetry

• Steam or heat builds up around nearby walls

These aren’t just cosmetic issues – they’re signals that something hasn’t been wired, connected, or positioned properly. A quick fix today can prevent bigger problems tomorrow.

Real Situations We’ve Fixed

• A double oven wired with a standard 10A plug that melted behind the wall

• A dishwasher hardwired directly into the floor without isolation

• A dryer venting into a walk-in wardrobe, causing mould behind cabinetry

• A ceramic cooktop installed in a benchtop that flexed under heat

These jobs weren’t unsafe at first glance, but every one of them posed a long-term risk or breach of compliance. We don’t just connect – we inspect.